# Controllers

Setting ReliefCAM up for your controller. Pick yours.

- [GRBL](https://reliefcam.com/docs/controllers/grbl)
- [grblHAL / FluidNC](https://reliefcam.com/docs/controllers/grblhal)
- [Mach3 and Mach4](https://reliefcam.com/docs/controllers/mach)
- [LinuxCNC](https://reliefcam.com/docs/controllers/linuxcnc)
- [Masso](https://reliefcam.com/docs/controllers/masso)
- [DDCSV](https://reliefcam.com/docs/controllers/ddcsv)